Xiamen Goldcattle Plastic & Metal Product Co.,Ltd

A professional engaged in plastic accessories and hardware accessories industry Company!

Peek Injection Molding

Peek Injection Molding

Inventro polymers make peek parts for peek rod,sheet and injection molded components to near shape.products made from peek stock:peek connector,peek medical components,peek gear,peek ball valve seat, peek washers, peek insulator,peek antenna.

Send InquiryChat Now
Product Details

peek injection molding

Inventro polymers make peek parts for peek rod,sheet and injection molded components to near shape.products made from peek stock:peek connector,peek medical components,peek gear,peek ball valve seat, peek washers, peek insulator,peek antenna.

HTB1JBiMMXXXXXXIXVXXq6xXFXXXw.jpg


Properties of PEEK

PEEK is a semicrystalline, high-temperature engineering thermoplastic. It melts at relatively high temperatures compared to most thermoplastic materials. It has great mechanical and chemical resistant properties that are retained in high temperatures. It has low smoke and toxic-gas emissions, low moisture absorption, excellent fatigue, stress-crack, hydrolysis and chemical resistance. PEEK is considered a “high performance” material.
There are numerous grades of PEEK, but some commonly used ones include:

  • Unfilled - is an unreinforced general-purpose grade that offers steam and wear resistance. It also is the greatest elongation and durability of all the grades. It is best for device components where aesthetics is a concern.

  • 30% Glass-Fiber Reinforced – glass fiber is added to reduce the expansion rate and increases the flexural modulus. This PEEK material would be used for applications that use temperatures higher than 300º F. Rebling would use this material when strength, stiffness and stability are a key factor.

  • 30% Carbon-Fiber Reinforced – carbon fibers lower the expansion right and greater thermal conductivity. This Peek material offers the ideal wear-resistance and load carrying of all the PEEK grades.

  • Bearing Grade – a mixture of carbon fiber with graphite and PTFE lubricants. This offers the lowest amount of friction and the best machinability of all the PEEK grades. This is also the easiest machining material.


You may ask, why choose us ?Because

1.100% quality guarantee
2.Competitive price
3.Tolerance 0.005~0.1mm
4.One-stop service,from design to delievry
5.Small order accepted
6.Free sample or refund when order comfirmed
7.High speed machining will be shorter delivery and excellent finish.
8.Sinior engineer good at complex parts
9.Strict quality control system
10.Young and vigorous service team

5-factory-show.jpg


PEEK plastic injection molding processing

With PEEK, like other high temperature thermoplastics, it is critical to use an injection molder who has experience molding these materials. The mechanical properties of the finish product can be compromised if the process temperatures do not meet the recommended ranges.


You can see the pictures that we once designed and produced:

HTB1vOZIRFXXXXb1XXXXq6xXFXXXB.jpg


QQ截图20170914143032.jpg

Xiamen Goldcattle Plastic & Metal Products  CO.,Ltd.

Tel:+8618850195517/Skype:+8618850195517

Whatsapp:+8618850195517/Fax:+86-592-2132965

Address:8th Floor,Dongfang shangmao  Building,NO.56 Yibinbei RD,Huli  Dist,Xiamen,Fujian,China.(Mainland)

Hot Tags: peek injection molding, China, manufacturers, suppliers, factory, customized, services
Inquiry