Xiamen Goldcattle Plastic & Metal Product Co.,Ltd

A professional engaged in plastic accessories and hardware accessories industry Company!

Metal Lathe Turning

Metal Lathe Turning

Lathe processing, lathe processing is part of the machining. The machining of the lathe is mainly done by turning the workpiece. In the lathe can also be used drill, reaming drill, reamer, tap, die and knurling tools such as the corresponding processing. The lathe is mainly used for machining shafts, plates, sleeves and other workpieces with slewing surfaces, and is the most widely used machine tool for machinery manufacturing and repair plants.

Send InquiryChat Now
Product Details

metal lathe turning

Lathe processing, lathe processing is part of the machining. The machining of the lathe is mainly done by turning the workpiece. In the lathe can also be used drill, reaming drill, reamer, tap, die and knurling tools such as the corresponding processing. The  lathe is mainly used for machining shafts, plates, sleeves and other  workpieces with slewing surfaces, and is the most widely used machine  tool for machinery manufacturing and repair plants.

metal-lathe-turning.jpg

Process characteristics
1, easy to ensure that the workpiece surface of the processing accuracy
a For example, easy to guarantee coaxial requirements
Use the chuck to install the workpiece, the rotary axis is the turning axis of the lathe spindle
With the front and rear mounting of the workpiece, the rotary axis is the top center of the two lines
b  easy to ensure that the vertical and horizontal axis requirements from  the slide plate guide, and the workpiece rotation axis of the vertical
2,  the cutting process is more smooth to avoid the inertial force and  impact, allowing the use of a larger amount of cutting, high-speed  cutting, which will help improve productivity.
3, suitable for finishing the non-ferrous metal parts
Non-ferrous  metal parts surface roughness Ra large value required, it is not  appropriate to use grinding, the need for turning or milling. With a fine diamond car for fine cars, up to a higher quality.
4, the tool is simple
Turning tools, grinding and installation are more convenient.

图片.png


Practical application

In  the lathe using different turning tools or other tools, you can process  a variety of rotary surfaces, such as inside and outside the  cylindrical surface, inside and outside the conical surface, thread,  groove, end and forming surface, the processing accuracy of IT8 IT7,  surface roughness Ra Value of 1.6 to 0.8, turning commonly  used to process a single axis of the parts, such as straight and general  plate, sets of parts and so on. If you change the  installation location of the workpiece or the appropriate modification  of the lathe, you can also process multi-axis parts (such as crankshaft,  eccentric wheel, etc.) or disc cam. Single-piece  small batch production, all kinds of shafts, plates, sets of parts and  other parts of the selection of wide adaptability of horizontal lathe or  CNC lathe for processing; large diameter and short length (length to  diameter 0.3 to 0.8) of large parts, Vertical lathe processing. Batch  production shape is more complex, with the hole and the thread of small  shaft, sets of parts, should be used turret lathe for processing. Large  quantities, the production of small parts of the shape is not too  complex, such as screws, nuts, pipe joints, bushings, etc., the choice  of semi-automatic and automatic lathe for processing. Its productivity is high but the accuracy is low.

图片.png


Lathe classification
According  to the use and structure of the different lathes are divided into  horizontal lathes and floor lathes, vertical lathe, turret lathe,  single-axis automatic lathes, multi-axis automatic and semi-automatic  lathes, profiled lathes and multi-knife lathe and a variety of  specialized Lathes such as camshaft lathes, crankshaft lathes, wheel lathes, shovel lathes. In all lathes, horizontal lathes are the most widely used. Horizontal lathe processing size tolerance level up to IT8 ~ IT7, surface roughness Ra value of up to 1.6μm. Computer  technology is widely used in the machine tool manufacturing industry,  followed by the emergence of CNC lathes, turning machining centers and  other mechanical and electrical integration products.


Contact Us

Watson Lin

Xiamen Goldcattle Plastic & Metal Product Co.,Ltd

Tel:+86-0592-2058153
M.B:+86-18850195507
Skype:Watson_Lin
Fax:+86-592-2132965
Email:sales4@xmgoldcattle.com
Website:http://gc-manufacture.com/
Address:8th Floor,Dongfang shangmao Building,NO.56 Yibinbei RD, Huli Dist,Xiamen,Fujian,China 361006

正式照(小).jpg


Hot Tags: metal lathe turning, China, manufacturers, suppliers, factory, customized, services
Inquiry