Lathe processing is part of the machining, there are two main forms of processing: one is to fix the knife, the processing of the rotation of the unformed workpiece; the other is the workpiece fixed, through the workpiece high-speed rotation, turning ( Turret) for lateral and longitudinal movement. CNC lathe processing is usually controlled by the control system, servo system, detection system, mechanical transmission system and other auxiliary systems.
online cnc machining precious metal lathe components customized
The materials used for the processing of lathes are usually made of cutting steel and copper, easy cutting steel containing sulfur S and phosphorus P higher material, sulfur and manganese in the steel is the form of manganese sulfide, and manganese sulfide in modern lathe Processing of commonly used materials The use of aluminum alloy materials, aluminum alloy density relative to the density of iron and steel materials greatly reduced, and the lathe processing is difficult, plasticity, product weight greatly reduced, but also greatly shorten the lathe processing parts of the time The result is a reduction in the cost of aluminum alloy has become the darling of the field of aviation accessories.
|Material||Gold,Silver,Brass,Bronze,Copper,Iron,Aluminum,Stainless Steel, Titaninum etc.|
|Color||Metal Colors Avaliable|
|Surface finish||Chrome Plating,Zinc Plating,Blackening,Nickel plating,Electrophoresis,|
Anodization,Brushing,Polishing,Blacken,Powder coating,Sandblasting,de buring,Passivation,Etc
|Process Craft||Turning,Milling,Drilling,Wire EDM,Grinding,Engraving,Tapping,Knurling,And other sub machining processes,Etc|
|Equipment||260 CNC Lathe,200 Auto Lathe,10 CNC Tapping Center,2 MAZAK five axis CNC,Each month we increase about 10 lathes|
|Testing Facility||Coordinate Measuring Machine,Projector,Roughness Tester,Hardness Tester,Concentricity Tester,Tool Microscope,Digimatic Micrometer,Inside Micrometer,Dial Indicator,Go No Go Gauge,Dialgage,Eletronic,Digital Display Caliper,Automatic Height Gauge,Precision Level 2 Detector,Precision Block Gauge,00 Levels Of Marble Platform/Ring Gague,Etc|
|Quality Assurance||ISO9001:2008 Certified,SGS Certification|
|Drawing Format||JPEG, PDF, DWG, DXF, IGS, STEP, CAD|
|Remarks||All parts are not in stock,customization only;|
Parts can be supplied according to customers drawings or sample
The rapid development of scientific error compensation technology has greatly enriched the precision mechanical design theory, precision measurement and the entire precision engineering, as an important branch of this discipline. Techniques related to error compensation include detection technology, sensing technology, signal processing technology, optoelectronic technology, material technology, computer technology and control technology. As a new technology branch, error compensation technology has its own independent content and features. Further study of error compensation technology, make it theoretical, systematic, will have a very important scientific significance.
1) Turning the step axis, in order to ensure the rigidity of the turning, the general should be a larger part of the first diameter, after the car smaller diameter part.
2) When cutting the workpiece in the shaft, it should be carried out before the fine car to prevent the workpiece deformation.
3) when the thread with a threaded shaft, the general should be processed in the thread after the car without thread part.
4) Before drilling, the end of the workpiece should be flat. If necessary, first hit the center hole.
5) drilling deep hole, the general first drill hole.
6) Turning (Φ10-Φ20) ㎜ hole, the diameter of the arbor should be processed 0.6-0.7 times the diameter; processing diameter greater than Φ20 mm hole, the general should be used to clamp the knife blade.
7) turning the long thread or multi-head worm, adjust the exchange gear after the test cut.
8) the use of automatic lathe, according to the machine to adjust the card to adjust the relative position of the tool and the workpiece, adjusted to be tested after the first test, the first qualified before processing; processing at any time attention to the tool wear and workpiece size and surface roughness degree.
9) When turning on a vertical lathe, do not move the beam as soon as the turret is adjusted.
10) When the surface of the workpiece has a position tolerance requirements, as far as possible in a fixture to complete the turning.
11) When turning the cylindrical gear blank, the hole and the reference face must be machined in a single clamping. If necessary, should be in the end of the gears around the circle outside the mark line.
Q: How soon can I get reply after send inquiry?
A: 1.All inquiries will be replied within 1 day except sleeping time in China.
2.Our call phones standing by any calls at any time.
Q: How soon can I get sample ?
A: It depends your parts,generally sample can be sent out within 7days after product drawing confirmed by both side.
Q:What information should I give to you for inquiry?
A:Pls send your 2d and 3d drawings ,and tell us your special requirements such as material,tolerance,surface treatments and the amount you need ,ect .
Q: If I don’t have drawing, how can I get sample ?
A: If you don’t have any drawing,you can send us your sample, we will scan it and make 2D and 3D drawing first, then make sample for you.
Q: What’s your MOQ(minimum order quantity)
A: We don’t have MOQ, you are welcome to send us trial order to test our quality and service.
Xiamen Goldcattle Plastic & Metal Product Co.,Ltd
Address:8th Floor,Dongfang shangmao Building,NO.56 Yibinbei RD, Huli Dist,Xiamen,Fujian,China 361006